国产久热在线观看视频

<blockquote id="ztumt"></blockquote>

      E-mail: sales@winnix.net

      R2000 Chip High Power Uhf Rfid Reader Module with Four Antenna Ports

      Products Mode: HYM750P
      Chip: Impinj R2000
      Fixed Current: ≤1.2 A
      Fixed Power: 30dBm
      Stepping Interval: 1dBm
      Tag Protocol: EPC C1G2/ISO18000-6C
      Typical Read Range: 10m with 8dBi rfid antenna

       

      tubiao.png Brief introduction

      HYM750P UHF RFID reader uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz,with LBT function(Customizable). It supports dense reader working mode (DRM). Max Power is 31dbm.With standard 8dBi antenna,the reading distance can reach 15meters, maximum identifying speed can reach 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc. It is well used in high performance fixed readers.

       

      tubiao.png Technical data

      No Item Technical data Unit Remark
      1 Max current 1600 mA Max power output
      2 Standby current ≤1 mA EN pin low level
      3 Frequency range 840~960 MHz  
      4 Defaul working frequency Frequency hopping MHz Frequency interval 250KHz
      5 Channel bandwidth ≤250 KHz  
      6 Frequency hopping speed ≤2 s  
      7 Fixed power 31 dBm  
      8 Stepping interval 1 dB 5~30dBm, adjustable by software
      9 Label protocol EPC C1G2
      /ISO18000-6C
         
      10 Communication protocol Asynchronos serial ports protocol    
      11 Starting time ≤50 ms  
      12 Radio-frequency power rising time ≤500 μs  
      13 Radio-frequency power droping time ≤500 μs  
      14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
      ≤-60 dB ±2CH
      15 Frequency stablizing ratio ±10 ppm -25℃~+40℃
      ±20 ppm -40℃~+60℃
      16 Max reading range >15 m 8dBi antena
      17 Muti-tags >400/s    


      tubiao.png Characteristics of DC

      Data Mini value Typical value Max value Unit Remark
      Voltage of power 3.3 4 5.5 V Direct current
      Input high level 2 3.3 3.5 V GPIO
      2 3.3 3.5 V EN
      Input low level -0.5 0 0.5 V GPIO
      - - 0.18 V EN
      Output high level 2.3 - 3.3 V GPIO
      Output low level 0 - 1 V GPIO
      Enable current 2 5 25 uA VEN≥2V


      tubiao.png Requirement on antenna

      No Item Technical data Unit Remark
      1 VSWR ≤1.5    


      tubiao.png Appearance and structure

      • Size: 76.5×39.7×9mm
      • Weight: 50g

      1.jpg

       

      tubiao.png Interface definition

      Pin Signal name Signal direction Function/compatibility description
      1 VCC Input Module supplying power
      2 VCC Input Module supplying power
      3 GND - Module connecting ground
      4 GND - Module connecting ground
      5 EN Input Module enabling,highly effective
      6 GPIO Bidirection Generic port
      7 GPIO Bidirection Generic port
      8 GPIO Bidirection Generic port
      9 UART_RX Input Asynchronous serial interface receiving
      10 UART_TX Output Asynchronous serial interface sending
      11 DBG_RX - Test port
      12 DBG_TX - Test port


      tubiao.png 6pin debug Interface definition

      Pin

      Signal name

      Signal direction

      Function/compatibility description

      1

      VCC

      Input

      Module supplying power

      2

      GND

      -

      Module connecting ground

      3

      EN

      Input

      Module enabling,highly effective

      4

      GPIO

      Bidirection

      Generic port

      5

      UART_RX

      Input

      Asynchronous serial interface receiving

      6

      UART_TX

      Output

      Asynchronous serial interface sending

      NOTICE:The 6 pin interface is for debug

      tubiao.png Environment requirement

      No Item Technical data Unit Remark
      1 Working temperature -25~+75  
      2 Storage temperature -40~+85  
      3 Relative humidity 10%~90% RH  

       

      国产久热在线观看视频
      <blockquote id="ztumt"></blockquote>