国产久热在线观看视频

<blockquote id="ztumt"></blockquote>

      E-mail: sales@winnix.net

      Single Antenna Port R500 Chip UHF Rfid Reader Module

      Products Mode: HYM730
      Chip: Impinj R500
      Fixed Current: ≤1.5 A
      Fixed Power: 30dBm
      Stepping Interval: 1dBm
      Tag Protocol: EPC C1G2/ISO18000-6C
      Typical Read Range: 7m with 8dBi rfid antenna

       

      tubiao.pngBrief Introduction

      HYM730 UHF RFID reader module uses R500 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz. It supports dense reader working mode(DRM)。With standard 8dBi antenna,the reading distance can reach up to 7 meters, maximum identifying speed can reach up to 200/S. With simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc.

       

      tubiao.png Technical Data

      No Item Technical data Unit Remark
      1 Fixed current 1.5 A Max power output
      2 Standby current ≤1 mA EN pin low level
      3 Frequency range 840~960 MHz  
      4 Default working frequency Frequency hopping MHz Frequency interval 250KHz
      5 Channel bandwidth ≤250 KHz  
      6 Frequency hopping speed ≤2 s  
      7 Fixed power 30 dBm  
      8 Stepping interval 1 dB 5~30dBm, adjustable by software
      9 Label protocol EPC C1G2
      /ISO18000-6C
         
      10 Communication protocol Asynchronous serial ports protocol    
      11 Starting time ≤50 ms  
      12 Radio-frequency power rising time ≤500 μs  
      13 Radio-frequency power dropping time ≤500 μs  
      14 Adjacent channel power leaking ratio ≤-40 dB ±1CH
      ≤-60 dB ±2CH
      15 Frequency stabilizing ratio ±10 ppm -25℃~+40℃
      ±20 ppm -40℃~+60℃
      16 Max reading range 7 m 8dBi antenna

       

      tubiao.png Characteristics of DC

      Data Mini value Typical value Max value Unit Remark
      Voltage of power 3.6 - 5 V Direct current
      Input high level 2 3.3 3.5 V GPIO
      2 - 5 V EN
      Input low level -0.5 0 0.5 V GPIO
      - - 0.18 V EN
      Output high level 2.3 - 3.3 V GPIO
      Output low level - 0 1 V GPIO
      Enable current 2 5 25 uA VEN≥2V

       

      tubiao.png Requirement on Antenna

      No Item Technical data Unit Remark
      1 S11 ≤-10dB    

       

      tubiao.png Appearance and Structure

      • Dimensions:56×36×7.4mm
      • Weight:40g

      1.jpg

       

      tubiao.png Interface Definition

      Front Interface:

      Pin Signal name Signal direction Function/compatibility description
      1 VCC Input Module supplying power
      2 VCC Input Module supplying power
      3 GND - Module connecting ground
      4 GND - Module connecting ground
      5 EN Input Module enabling,highly effective
      6 GPIO Bidirection Generic port
      7 GPIO Bidirection Generic port
      8 GPIO Bidirection Generic port
      9 UART_RX Input Asynchronous serial interface receiving
      10 UART_TX Output Asynchronous serial interface sending
      11 DBG_RX - Test port


      Back Interface:

      Pin Signal name Signal direction Function/compatibility description
      1 VCC Input Module supplying power
      4 GND - Module connecting ground
      5 EN Input Module enabling,highly effective
      6 GPIO Bidirection Generic port
      9 UART_RX Input Asynchronous serial interface receiving
      10 UART_TX Output Asynchronous serial interface sending

       

      tubiao.png Environment Requiremen

      No Item Technical data Unit Remark
      1 Working temperature -25~+75  
      2 Storage temperature -40~+85  
      3 Relative humidity 10%~90% RH  

       

      tubiao.png Certification

      FCC ID: RVZHYM740
      CE: ETSI EN 302 208
      ETSI EN 301 489
      ETSI EN50364

       

      tubiao.png Video Description



      国产久热在线观看视频
      <blockquote id="ztumt"></blockquote>